Basket :0 item(s)
Home  » Solar Testing Equipment » Multifunction Testers » Seaward EV100 EVSE EV Charge Point Tester

Seaward EV100 EVSE EV Charge Point Tester

Ensure electric vehicle charge points operate in the correctly & safely
Seaward EV100 EVSE EV Charge Point Tester
Click to enlarge
Price:(Ex.VAT) £795.00
 Add to Basket

The Seaward EV100 Electric Vehicle Supply Equipment (EVSE) Tester is an all-in-one solution for ensuring electric vehicle charge points operate in the correct and safe manner, both at the point of installation and throughout its serviceable life as part of a periodic maintenance schedule in accordance with IEC61851.

Key features

  • Diagnose EV (electric vehicle) charge point faults
  • Commissioning and periodic maintenance tests
  • Traceable proof of testing, in accordance with IEC61851-1

Installation testing with the EV100

Operated by an intuitive user interface, the Seaward EV100 EVSE Charge Point Tester will simulate all of the most common charging cable ratings, conducting tests to verify the correct response from the vehicle charging point (Type 1 and Type 2) at the push of a button. These installation tests include:

  • Output voltage
  • Maximum available charging current
  • Insulation resistance
  • Earth loop impedance (non trip)
  • RCD trip time
  • Control pilot PWM measurements
  • Simulation of cable coding
  • Vent fan check (for applicable vented battery systems)

Fault diagnosis using the EV100

The Seaward EV100 EVSE Tester can also be used a comprehensive fault diagnosis tool. By simulating numerous electric vehicle fault conditions, the EV100 will automatically store electronic fault data, including disconnection time, fault amplitude, frequency and duty cycle of the pulse width modulation (PWM) signal between the vehicle charge point and the simulated electric vehicle.

Whilst basic data is displayed on the Seaward EV 100 LCD display, more comprehensive diagnostic data is electronically stored on an internal memory. This data can be downloaded using wireless NFC technology to an Android device running Seaward’s EVSEMobile App allowing for instant, remote sharing to third party engineers for further in-depth fault diagnosis, or electronic storage for traceability purposes.

Supply voltage measurement

  • Display range 0.0V – 300V AC
  • Measurement range 0.0V – 300V AC
  • Resolution 1V maximum
  • Frequency range 45Hz to 65Hz


Insulation resistance

  • Display range 0.01MΩ to 19.9MΩ
  • Resolution 0.01MΩ maximum
  • Open circuit test voltage 500V @ 1mA nominal
  • Short circuit test current <2mA
  • Protection Warning if ≥ 30V AC or DC present


Earth loop impedance (non trip)

  • Supply voltage 195V – 253V 45Hz to 65Hz
  • Nominal Test current <15mA (will not trip 30mA RCD)
  • Display range 1Ω - 1.99kΩ
  • Resolution 1Ω maximum


RCD test

  • Supply voltage 195V – 253V 45Hz to 65Hz
  • Test current (rms) 30mA
  • Trip time ranges 40ms to 2000ms
  • Available tests ½ IΔn, IΔn, 5 IΔn


Control pilot PWM measurements

  • Voltage range ±14v DC
  • Voltage resolution 0.1V
  • Frequency range 940 Hz to 1040 Hz
  • Frequency resolution 0.1Hz
  • Duty cycle range 2% to 98%
  • Resolution 0.1%
  • Response time range 1ms to 10s
  • Resolution 1ms


Simulation of cable coding

  • EN 61851 13A capability 1.5 kohms +/- 1%
  • EN 61851 20A capability 680 ohms +/- 1%
  • EN 61851 32A capability 220 ohms +/- 1%
  • EN 61851 63A 3Ph capability 100 ohms +/- 1%
  • EN 61851 70A 1Ph capability 100 ohms +/- 1%


Fault simulation

  • Open circuit diode
  • Short circuit diode
  • Short to earth
  • Coupler disconnection


Case dimensions and weight

  • Weight 0.9kg
  • Dimensions 260mm x 100mm x 55mm
  • Power Source 6 x AA Cells


App compatibility

  • Compatible with Android version 4.2 Jelly Bean
  • iOS devices not supported



  • NFC (Near Field Communication)
  • iOS devices not supported


EV100 test kit, complete with Type 2 test adaptor (part no. 405A910)

  • EV100 tester
  • Type 2 test adaptor
  • Carry case
  • Quick start guide
  • Operating instructions
  • EVSEMobile app (downloadable from Android app store)


Optional accessories

  • Type 1 test adaptor 405A950
  • Type 2 test adaptor 405A951
  • Type 3 (SCAME) test adaptor 405A952
  • Android test data download Enquire device (NFC equipped)


Services: 2 year warranty

  • Seaward EV100 EV Charge Point Testing Equipment
  • Type 2 test adaptor
  • Carry case
  • Quick start guide EV 100
  • Operating instructions
  • EVSEMobile app (downloadable from Android app store)

  • Reviews / Comments

No reviews have been made for this product.
Be the first to review this product!